Top New NSE8_812 Braindumps Questions 100% Pass | Reliable NSE8_812: Fortinet NSE 8 - Written Exam (NSE8_812) 100% Pass

Our NSE8_812 study questions will update frequently to guarantee that you can get enough test banks and follow the trend in the theory and the practice. That is to say, our product boosts many advantages and to gain a better understanding of our Fortinet NSE 8 - Written Exam (NSE8_812) guide torrent. It is very worthy for you to buy our product and please trust us. If you still can’t fully believe us, please read the introduction of the features and the functions of our product as follow.

Fortinet Network Security Expert 8 (NSE8) certification program is designed to validate the knowledge and skills of experienced security professionals in designing, implementing, and managing advanced security solutions using Fortinet products. The NSE8_812 certification exam is a written exam that tests your knowledge and understanding of the Fortinet Security Fabric and the FortiGate security platforms. NSE8_812 Exam is intended for security professionals who want to demonstrate their expertise in advanced security concepts and Fortinet products.

>> New NSE8_812 Braindumps Questions <<

NSE8_812 Study Center, NSE8_812 Exam Forum

As for the points you may elapse or being frequently tested in the real exam, we give referent information, then involved them into our NSE8_812 actual exam. Our experts expertise about NSE8_812 training materials is unquestionable considering their long-time research and compile. I believe that no one can know the NSE8_812 Exam Questions better than them. And they always keep a close eye on the changes of the content and displays of the NSE8_812 study guide.

Fortinet NSE8_812 Certification Exam has a time limit of 120 minutes. It is an online exam, and candidates must have a reliable and stable internet connection to take the exam. NSE8_812 exam fee is $400, and the certification is valid for two years. Fortinet NSE 8 - Written Exam (NSE8_812) certification demonstrates that the certified individual possesses a high level of expertise in using Fortinet's latest products, technologies, and best practices to secure a network.

Fortinet NSE 8 - Written Exam (NSE8_812) Sample Questions (Q15-Q20):

NEW QUESTION # 15
Refer to the exhibit.

You have deployed a security fabric with three FortiGate devices as shown in the exhibit. FGT_2 has the following configuration:

FGT_1 and FGT_3 are configured with the default setting. Which statement is true for the synchronization of fabric-objects?

A. Objects from the root FortiGate will only be synchronized to FGT_3.
B. Objects from the root FortiGate will not be synchronized to any downstream FortiGate.
C. Objects from the root FortiGate will only be synchronized to FGT__2.
D. Objects from the FortiGate FGT_2 will be synchronized to the upstream FortiGate.

Answer: B

Explanation:
The fabric-object-unification setting on FGT_2 is set to local, which means that objects will not be synchronized to any other FortiGate devices in the security fabric. The default setting for fabric-object-unification is default, which means that objects will be synchronized from the root FortiGate to all downstream FortiGate devices.
Since FGT_2 is not the root FortiGate and the fabric-object-unification setting is set to local, objects from the root FortiGate will not be synchronized to FGT_2.
Reference:
Synchronizing objects across the Security Fabric: https://docs.fortinet.com/document/fortigate/6.4.0/administration-guide/880913/synchronizing-objects-across-the-security-fabric

NEW QUESTION # 16
Refer to the exhibit, which shows a VPN topology.

The device IP 10.1.100.40 downloads a file from the FTP server IP 192.168.4.50 Referring to the exhibit, what will be the traffic flow behavior if ADVPN is configured in this environment?

A. The TCP port 21 must be allowed on the NAT Device2
B. ADVPN is not supported when spokes are behind NAT
C. Spoke1 will establish an ADVPN shortcut to Spoke2
D. All the session traffic will pass through the Hub

Answer: C

Explanation:
D is correct because Spoke1 will establish an ADVPN shortcut to Spoke2 when it detects that there is a demand for traffic between them. This is explained in the Fortinet Community article on Technical Tip:
Fortinet Auto Discovery VPN (ADVPN) under Summary - ADVPN sequence of events. References:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Fortinet-Auto-Discovery-VPN-ADVPN/ta-p
/195698

NEW QUESTION # 17
Refer to the exhibits.

A customer is looking for a solution to authenticate the clients connected to a hardware switch interface of a FortiGate 400E.
Referring to the exhibits, which two conditions allow authentication to the client devices before assigning an IP address? (Choose two.)

A. Ports 3 and 4 can be part of different switch interfaces.
B. FortiGate devices with NP6 and hardware switch interfaces cannot support 802.1X authentication.
C. Client devices must have 802 1X authentication enabled
D. Devices connected directly to ports 3 and 4 can perform 802 1X authentication.

Answer: C,D

Explanation:
The customer wants to deploy a solution to authenticate the clients connected to a hardware switch interface of a FortiGate 400E device. A hardware switch interface is an interface that combines multiple physical interfaces into one logical interface, allowing them to act as a singleswitch with one IP address and one set of security policies. The customer wants to use 802.1X authentication for this solution, which is a standard protocol for port-based network access control (PNAC) that authenticates clients based on their credentials before granting them access to network resources. One condition that allows authentication to the client devices before assigning an IP address is that devices connected directly to ports 3 and 4 can perform 802.1X authentication. This is because ports 3 and 4 are part of the hardware switch interface named "lan", which has an IP address of 10.10.10.254/24 and an inbound SSL inspection profile named "ssl-inspection". The inbound SSL inspection profile enables the FortiGate device to intercept and inspect SSL/TLS traffic from clients before forwarding it to servers, which allows it to apply security policies and features such as antivirus, web filtering, application control, etc. However, before performing SSL inspection, the FortiGate device needs to authenticate the clients using 802.1X authentication, which requires the clients to send their credentials (such as username and password) to the FortiGate device over a secure EAP (Extensible Authentication Protocol) channel. The FortiGate device then verifies the credentials with an authentication server (such as RADIUS or LDAP) and grants or denies access to the clients based on the authentication result. Therefore, devices connected directly to ports 3 and 4 can perform 802.1X authentication before assigning an IP address.
Another condition that allows authentication to the client devices before assigning an IP address is that client devices must have 802.1X authentication enabled. This is because 802.1X authentication is a mutual process that requires both the client devices and the FortiGate device to support and enable it. The client devices must have 802.1X authentication enabled in their network settings, which allows them to initiate the authentication process when they connect to the hardware switch interface of the FortiGate device. The client devices must also have an 802.1X supplicant software installed, which is a program that runs on the client devices and handles the communication with the FortiGate device using EAP messages. The client devices must also have a trusted certificate installed, which is used to verify the identity of the FortiGate device and establish a secure EAP channel. Therefore, client devices must have 802.1X authentication enabled before assigning an IP address. References: https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/19662/hardware- switch-interfaceshttps://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/19662/802-1x- authentication
https://docs.fortinet.com/document/fortigate/7.2.0/new-features/959502/support-802-1x-on-virtual-switch-for- certain-np6-platforms

NEW QUESTION # 18
Which two statements about bounce address tagging and verification (BATV) on FortiMail are true? (Choose two.)

A. Emails with an empty sender address will be subjected to bounce verification.
B. FortiMail will insert the BATV tag to the sender address in the envelope.
C. You must publish the BATV public key as a DNS TXT record.
D. BATV will use symmetric keys to verify the bounce address tag.

Answer: A,B

NEW QUESTION # 19
Refer to the exhibit, which shows the high availability configuration for the FortiAuthenticator (FAC1).

Based on this information, which statement is true about the next FortiAuthenticator (FAC2) member that will join an HA cluster with this FortiAuthenticator (FAC1)?

A. FAC2 can only process requests when FAC1 fails.
B. The FortiToken license will need to be installed on the FAC2.
C. FAC2 can have its HA interface on a different network than FAC1.
D. FSSO sessions from FAC1 will be synchronized to FAC2.

Answer: C

Explanation:
https://docs.fortinet.com/document/fortiauthenticator/6.5.3/administration-guide/122076/high-availability
https://docs.fortinet.com/document/fortiauthenticator/6.5.3/administration-guide/122076/high- availability#Standalo

NEW QUESTION # 20
......

NSE8_812 Study Center: https://www.dumptorrent.com/NSE8_812-braindumps-torrent.html